Shanghai Special Metal Co., Ltd.
Main products:Casting,Weld Fabrication,Machining,Titanium,Special Alloy
Contact Us
  • Contact Person : Ms. Liu Carrie
  • Company Name : Shanghai Special Metal Co., Ltd.
  • Tel : 86-021-51696870
  • Fax : 86-021-33847960
  • Address : Shanghai,Shanghai,Rm. E&F, Floor 12, No. 985, Dongfang Road, Pudong New Area
  • Country/Region : China
  • Zip : 200122

Slag pot-steel casting

Slag pot-steel casting
Product Detailed
Slag pot made from: 1.Carbon steel casting according to ASTM, BS, DIN standard. 2. With or without trunnion. 3. Volume:5-3

Slag pot is a load-bearing device whose sole purpose is to collect molten or solid slag generated during metallurgical or chemical processes, to retain it during transport and to deposit it at a place of disposal.

1. Material 

 Cast Steelswith differing chemical compositions but defined mechanical properties play a dominant role in the manufacture of slag pots. Standard specifications of Cast Steel for slag pots may be found here:




United Kingdom

BS 3100:1991






DIN 17182



JIS G7821:2000



ISO 3755:1991 

2. Mechanical properties for Cast Steel slag pots are given below:

  USA(MPA)Europe (MPA)
Tensile strength


 Yield strength





 Reduction of area




Name Dimension Weight Filled volume
 Round Slagpot 4.440 x 3.700 x 3.050 26Ton 17CBM
 Round Slagpot 5.100 x 3.260 x 3.500 33Ton 16CBM
 Round Slagpot 5.350 x 4.150 x 3.250  34.3Ton 23CBM
 Round Slagpot 5.200 x 4.040 x 3.050 32Ton 20CBM
 Round Slagpot 4.660 x 3.600 x 3.200 26Ton 16.4CBM
 Oval Slagpot 4.700 x 3.890/5.180 x 3.120 40Ton 25.5CBM
 Oval Slagpot 4.065 x 3.430/4.450 x 3.050 30Ton19CBM 
 Round Slagpot 5.250 x 4.400 x 3.000 34.5Ton 18CBM
  Oval Slagpot 3.990x4.075x2.680 21.5Ton 16CBM
Round Slagpot 4.825x4.240x3.275 38Ton 23CBM
 Oval Slagpot 5.840x6.004x3.900 60Ton 45CBM
  Round Slagpot 5.02x4.58x3.15 40Ton 28CBM
Oval Slagpot 4.29x3.61x3.48 35Ton  21.4CBM
  Oval Slagpot 3.245x3.8x2.85 19Ton 14CBM
 Petals rim Slagpot 3.4x3x2.374 13.5Ton 6.2CBM
 Oval Slagpot 2.71x2.3x2.275 9Ton 6CBM

4.Delivery condition: normalized

5.Quality assurance

 The fabrication route is governed by the provisions of the implemented Quality System ISO 9001: 2000.The standard documentation ensures the full traceability of every process step:Manufacturer test certificates according to DIN EN 10.204 § 3.1 including chemical composition,Mechanical properties and non-destructive examination;Dimensional check supported with a “as-built“ sketch;Record of the quality heat treatment;

Slag pot-steel casting

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.